APPLICATION Our material filter recommends the right tools for your desired application. Just click on the application that you'll work with and we recommend the right products.
-
Alle -
Abrasive materials -
Aerated concrete -
Aggregated concrete -
aluminium -
Asphalt -
Basalt -
Basement stone -
Building material -
Ceramics -
Clay pipes -
Clinker -
Coatings -
Compound plaster -
Concrete -
Concrete pipes -
Copper -
Cured concrete -
Drywall -
Facing brick -
GFK -
Glass -
Glazed tiles -
Glue -
Granite -
Green concrete -
Hard artificial stone -
Hard clinker -
Hard stone -
Industrial floorings -
Iron -
Lava -
Lightweight concrete -
Lime sand stone -
Lime sand stone highly compressed -
Magnesitstone -
Marble -
Masonry -
Medium hard clinker -
Natural & artificial stone -
Natural stone -
Plastic -
Porcelain -
Porotone -
Porphyr -
Pumice stone -
Quarzite -
Red brick -
Refractory brick -
Reinforced concrete -
Roof tiles -
Screed -
Sheets / profiles -
Slate -
Soft clinker -
Solnhofer -
Steel -
Stone plates -
Stoneware pipes -
Structrual steel -
Terrazzo -
Thin granite slabs - Thin granite slabs
-
Tiles -
Travertine -
Universal -
Wood
Diamond core drillECO SET
Verfügbar in Ø 68 – 82 mm
- Complete set
Application:Masonry, bricksSet consists of 1 piece each:Core bit M 16, reception shaft hexagonal, centering drill and taper key
Diamond grinding cupNEW FAN CUP UNIVERSAL GOLD
CONCRETE / UNIVERSAL
- Ø 100 – 125 mm / Bore: 22.23 mm/height 22 mm
- Ø 180 mm / Bore: 22.23 mm/height 32 mm
- Natural stone, granite, concrete, building material
Application:Natural stone, granite, concrete, building materialOptimal dust discharge
Diamond grinding cupNEW FAN CUP ABRASIV YELLOW
ABRASIVE MATERIAL- Ø 125mm / Bore: 22.23 mm/height 22 mm
- Ø 180 mm / Bore: 22.23 mm/height 32 mm
- Powerful diamond grinding cup for grinding, removal, leveling, edge grinding, roughing
Application:Abrasive materials, screedPerfect dust removal!
Diamond grinding cupPREMIUM LINE EINFACH BELEGT
CONCRETE / UNIVERSAL- Ø 100 – 125 mm / Bore: 22.23 mm/height 21 mm
- Ø 180 mm / Bore: 22.23 mm/height 27 mm
- Very good grinding performance
Application:Concrete, Universal
Diamond grinding cupPREMIUM LINE DOPPELT BELEGT
CONCRETE / UNIVERSAL
- Ø 100 – 125 mm / Bore: 22.23 mm/height 21 mm
- The 180 mm / Bore: 22.23 mm/height 27 mm
- Very good grinding performance
Application:Concrete, Universal
Diamond grinding cupPREMIUM LINE TURBO TYPE M 14
CONCRETE / UNIVERSAL- Ø100 mm (rough, medium, fine)/height 26 mm
- Very good grinding performance
Application:Natural stone, concrete, granite
Diamond grinding cupPREMIUM LINE TURBO TYPE
CONCRETE / UNIVERSAL- (100 mm) (Rough, medium, fine) / Bore: 22.23 mm/height 18 mm
- Very high grinding performance
Application:Natural stone, concrete, granite
Diamond grinding cupSPECIAL LINE BOSCH-MASCHINEN
SPECIAL BLADES- 125-180 mm / Bore: 22.23 mm/height 23 mm
Application:Concrete, Universal
Diamond grinding cupSPECIAL LINE BOSCH-MASCHINEN
SPECIAL BLADES- 125-180 mm / Bore: 22.23 mm/height 23 mm
Application:Abrasive materials, screed
Diamond grinding cupSPECIAL LINE BOSCH-MASCHINEN
SPECIAL BLADES- 125mm / Bore: 22.23 mm/height 21 mm
Application:Natural stone, concrete, building material, granite
Diamond grinding cupSPECIAL LINE MAKITA-MASCHINEN
CONCRETE / UNIVERSAL- 110mm / Bore: 15 mm/height 20 mm
Application:Natural stone, concrete, building material, granite
Diamond grinding cupSPECIAL LINE MAKITA-MASCHINEN
SPECIAL BLADES- 110mm / Bore: 15 mm/height 20 mm
Application:Abrasive materials, screed
Diamond grinding cupSPECIAL LINE FÜR FLEX- / A+S-MASCHINEN
SPECIAL BLADES- 125mm / Bore: 22.23 mm/height 22 mm
Application:concrete, building material, granite
Diamond grinding cupSPECIAL LINE FÜR FLEX- / A+S-MASCHINEN
SPECIAL BLADES- 125mm / Bore: 22.23 mm/height 22 mm
Application:Abrasive materials, screed
Diamond grinding cupSILVER LINE EINFACH BELEGT
CONCRETE / UNIVERSAL- Ø 125mm / Bore: 22.23 mm/height 21 mm
- Ø 180 mm / Bore: 22.23 mm/height 27 mm
Application:Concrete, Universal
Diamond grinding cupSILVER LINE DOPPELT BELEGT
CONCRETE / UNIVERSAL- -100-125 mm / Bore: 22.23 mm/height 21 mm
- Ø 180-230 mm / Bore: 22.23 mm/height 27 mm
Application:Concrete, Universal
Diamond grinding cupBASIC LINE DOPPELT BELEGT
CONCRETE / UNIVERSAL
- Ø 100 – 125 mm / Bore: 22.23 mm/height 21 mm
- Ø 180 mm / Bore: 22.23 mm/height 25 mm
- For medium and small grinding tasks
Application:Concrete, building material
Diamond grinding cupPKD SPEED
CONCRETE / UNIVERSAL- 125mm /Bore: 22.23 mm/height 24 mm
- The 180 mm / Bore: 22.23 mm/height 32 mm
- Special grinding cup with polycrystalline diamonds
Application:Thermal pads, adhesive, resin coating, plastics,Screed, green concreteFast and reliable milling ofproblematic covering without clogging!
Diamond cutting bladeSC 725
NATURAL AND ARTIFICIAL STONE
Available in Ø 250 – 900 mm
Short tooth alternating segments with high diamond concentration.
Application:
Hard stone, granite, porphyry, hard clinker
Diamond tuck pointing bladesV-FRÄSER PREMIUM
Available in Ø 115-230 mm
- Laser-welded sturdy milling discs with V-shaped-segments
- Application: Mortar, concrete
Application:Mortar, concreteFor beveling and widening of existing cracks!
Diamond grinding cupBLACK X
- Ø 125 – 180 mm (Rough, medium, fine) / bore: 22.23 mm
- Different grains
- Extremely powerful
Application:hard artificial stone, steel, granite, marble, hard plastics
M14 diamond grinding cupM14 diamond grinding cup
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 115 und 125 mm
Diamond tile grinding cup with turbo segments
Application:Granite and stone plates, porcelain, ceramic, tiles, concrete, screed, adhesive residues
Router fingerM14 router finger
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 20 mm
Premium quality diamond core drills.
Application:Porcelain, ceramics, stoneware, natural and artificial stone, granite, marble, clinker, roof tiles, concrete
Diamond grinding cupNEW FAN CUP INDUSTRIEBODEN BLAU
SPECIAL BLADES- Ø 125mm / Bore: 22.23 mm/height 22 mm
- Ø 180 mm / Bore: 22.23 mm/height 32 mm
- Powerful diamond grinding cup for grinding, removal, leveling, edge grinding, roughing
Application:Especially made for grinding and leveling of industrial floorsPerfect dust removal!
Diamond grinding cupSPECIAL LINE HI-SPEZIAL-BOHRUNG
SPECIAL BLADES- Ø 150 mm / Bore: 12.7 mm/height 30 mm
Application:Natural stone, granite, concrete, building material
Multi purpose bladeDUO COMPLETE
Available in Ø 115 or 125 mm
- Vacuum blasted cutting edge
- Diamond coated beveling
- suspension point for cutting depth
- Constant guidance
Application:Cutting and beveling all in one
Multi purpose bladeSILVER DOUBLE ACTION
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 115 mm or Ø 125 mm
- Diamond disc with 2 functions:
- Suitable for cutting and grindin very
- useful to trim edges of
- plastic tubes or to grind sharp edges
- of tiles.
Application:Cutting and grinding of tiles, ceramics and thin flags- Saw blade
ZAKKO PLUS
Available in Ø 160 – 250 mm
- Multi purpose saw blade
- Cutting free of burrs
- Finest cut width, no catching, no reworking
Application:Wood, plastics, tubes, sectional stripes,plates, copper, brass, aluminium compositeFor use with circular hand- and compund saw (not for angle grinders) 
Saw bladeZAKKO
Available in Ø 160 – 250 mm
- Multi purpose saw blade
- HM-fitted
- Less tool changes
- Cutting free of burrs
- Finest cut width, no catching, no reworking
Application:Wood, plastics, tubes, sectional stripes, plates, copper, brass, aluminium compositeFor use with circular hand- and compound saw (not for angle grinders)
Saw bladeZAKKO SLOW
Available in Ø 305 – 355 mm
- cold circular saw blade of the newest saw generation
Application:for metals like: soft steel, flat and angle iron, pipes,sheet metal,non-ferrous metal, plastic coated materialsFor dry saws and cold circular saws
Diamond core bitTYP 77-L
CONCRETE / UNIVERSAL
Available in Ø 42 bis 276 mm
- 1-1/4″ Usable lenght 400 mm
- Sgement height 10 mm
- Laser welded
Application:Concrete, UniversalOther diameters and special core bits up to 1200mm on request!
Diamond core bitSafe Borex
- Dry core bit Made in Germany
- Laser welded segments
- Special segment height: 11mm
- Professional quality for highest requirements
Application:Renforced concrete, masonry, natural and artificial stone
Diamond core bitDRYBOREX
Available in Ø 52 – 162 mm
- 1-1/4″ Usable lenght 400 mm
- Sgement height 10 mm
- Laser welded
Application:Brick, lime sand stone, light concrete, screed, ytong
Diamond tuck pointing bladeDFS PREMIUM
Available in Ø 115-125 mm, thickness 4.5-10.0 mm
- Laser-welded milling discs with protective segment
- Robust tuck pointing blade
Application:Mortar raking, masonryPowerful – in different dimensions!
Robust tuck pointing bladesDFS SILVER
Available in Ø 115-125 mm, 4.5-8.0 mm in thickness
- Robust tuck pointing blade
Application:Mortar raking, masonry
Diamond core drillsSUPERIOR
Available in Ø 68-82 mm
- Length 70 mm
- Problem solvers in hard materials
Application:for lime-sand stone highly compressedwith a crude density > 2.0
Diamond core drillsDSU
Available in Ø 68 – 82 mm
- Utility length 70 mm
- Highly resilient
Application:Universal, masonry, lightweight concrete, materials up to raw density 2.0
Diamond core drillsDSA
Available in Ø 68 – 82 mm
- Utility length 70 mm
- Highly resilient
Application:Abrasive materials, bricks, poroton up to a raw density > 1.4
Cutting and grinding bladeM14
NATURAL AND ARTIFICIAL STONEAvailable in Ø 125 mm
- Cutting and grinding with one tool
Application:Natural and artificial stone, facing brick, laid stone, marble
DiamanttrennscheibeBSXE/10
CONCRETE / UNIVERSAL
Verfügbar in Ø 115 – 350 mm
- Gesinterte Diamant-Trennscheibe
Einsatzbereiche:Beton, Ziegel, mittelharte und weiche Klinker, Baustellenmaterial
Diamond core bit set for battery drill machines10 part Diamond core bit set
TILES / CERAMICS / HARD ARTIFICIAL STONE
Set containing 8x Diamond core bits (Ø 18 – 82 mm), 1x centering drill/adapter + 1 x hex key
For clean edges.
Drilling depth up to 28mm.
Application:Tiles, ceramics, thin granite plates, porcelain
Diamond cutting bladePOWER TWISTER EISEN
CONCRETE / UNIVERSAL
Available in Ø 115 – 400 mm
- Universal power for iron and concrete
- Saves time by reducing tool changes
- Self-cooling in dry cutting
- Very high product lifespan
- High-frequency laser welding
Einsatzbereiche:Iron, reinforcing mats for construction sites, ductile cast iron pipes, reinforced concrete, natural stone, building material
Diamond cutting bladeDFX-TECHNOLOGY
CONCRETE / UNIVERSALAvailable in Ø 230 – 350 mm
- Top-speed cuttng disc with patented DFX technology
- 40% more cutting speed
- Improved cooling effect
- High-frequency laser welding
Application:Iron, concrete, exposed aggregate concrete, reinforced concrete, brickwork, clinker, granite, all hard materials
Diamond cutting bladeMASTER DRIVE TURBO
NATURAL AND ARTIFICIAL STONEAvailable in Ø 115 – 625 mm
High performance disc for stone and concrete
Application:Natural and artificial stone, granite, brick, reinforced concrete, clinker, drywall, ceramics
Diamond cutting bladeMASTER DRIVE UNIVERSAL
CONCRETE / UNIVERSAL
Available in Ø 115 – 450 mm
- Top performance in concrete and granite
- Self-cooling in dry cutting
- Very high product lifespan
Application:Concrete, aggregated concrete, roof tiles, brick, granite, clinker, building material
Diamond cutting bladeMASTER DRIVE ABRASIV
ABRASIVE MATERIALAvailable in Ø 115 – 450 mm
- Special disc for all abrasive materials
- Self-cooling when used for dry cuts
- Very long service life
- High frequency-laser welding
Application:asphalt, soft clinker, green concrete, refractory bricks, screed, lime sand stone
Grinding padDiamond hand grinding pad
TILES / CERAMICS / HARD ARTIFICIAL STONEDiamond hand grinding pads with different grains
For grinding and polishing hard surfaces
Application:Granite, stoneware, natural and artificial stone, marble, ceramics, tiles, glass, GFK
Diamond bore drillsDiamond bore drills M14
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 6 – 120 mm
Premium quality diamond core drills. Drilling without centering help tools.
Application:Granite and stone plates, porcelain, ceramics, tiles
Diamond drillsDiamond drills for battery drill machines
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 4 – 14 mm
Für clean edges and precise drills.
Application:Thin granite, porcelain, tiles, ceramic
Diamond core bit setDiamond core bit set for battery drill machines
TILES / CERAMICS / HARD ARTIFICIAL STONEIncludes: 7 Diamond core drills (Ø 4 – 14mm), 1x ejector + 1x Miniguide (includes onnector for water cooling)
Clean and sharp edged holes.
Application:Granite, stone, porcelain, tiles
Diamond tile drillDiamond tile drill
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 18 – 82 mm
For clean edges and precise drilling
Application:Thin granite, porcelain, tiles, ceramic- Diamant core bits Set
Diamond core bits M14 Set
TILES / CERAMICS / HARD ARTIFICIAL STONEDiamant core bits M14 Sets
Available in:
- Ø 35, 40, 50, 68 mm
- Ø 55, 60, 68, 75, 82 mm
- Ø 18, 20, 25, 32, 35, 40, 45, 50 mm
M14 connection – for usage on angle grinders
Application:Granite and stone plates, porcelain, ceramics, tilesAdvantages:Drilling without tapping tool 
Diamund cutting and grinding bladeFTS M14
NATURAL AND ARTIFICIAL STONEAvailable in Ø 115 und 125 mm
Used with all standard angle grinders
Application:Cutting and grinding marble, granite, artificial stone
Diamond cutting bladeTITAN FLASH
TILES / CERAMICS / HARD ARTIFICIAL STONE
Available in Ø 115 – 350 mm
Super fast premium diamond disc with 10 mm turbo rim.
ApplicationFor all hard and extremely hard materials
Diamond cutting bladeSLIM FAST
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 115 – 125 mm
The super thin and multifunctional power disc
Application:Natural and artificial stone, hard artificial stone, marble, tile, drywall, concrete, reinforced concrete, profile sheet metal, red brick, building materialSpecial application: Cut different materials without tool change
Diamond cutting bladeSPEEDY
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 115 – 350 mm
Super thin with continuous rim for fine, easy and clean cutting
Application:tile, ceramics, thin granite, hard artificial stone also glazed, marble slabsSpecial application: damagable surfaces
Diamond cutting bladeTURBO FINE CUT
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 115 – 350 mm
Super thin with turbo rim for fine cuts, clean edges and reduction of dust.
Application:
Natural and artificial stone, hard artificial stone, ceramicsSpecial application: Ø 115 + 125 mmCrown tile and glazed tiles
Diamond cutting bladeKD 10
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 250 – 400 mm
Narrow spaced segments.
Application:hard artificial stone, granite slabs, porcelain, marblePowerful special blade
Diamond cutting bladeRD-M
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 110 – 350 mm
Continuous cutting rim, clean cut
Application:
Tiles
Diamond cutting bladeSC 660
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 110 – 400 mm
Continuous rim, bronze bonding with high diamond concentration, long durability
Application:
Tile, thin granite, marble slabs, ceramics, glass
Diamond cutting bladeBMSM
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 250 – 400 mm
Narrow spaced segments, bronze bonding and long life time.
Application:
Marble, marble slabsPowerful special blade
Diamond cutting bladeEASY LINE
NATURAL AND ARTIFICIAL STONEAvailable in Ø 115 – 450 mm
powerful turbo segments
Very good cutting peformance
Application:
Natural and artificial stone, reinforced concrete, drywall, ceramics, building material
Diamond cutting bladeD 960 PLUS
NATURAL AND ARTIFICIAL STONEVerfügbar in Ø 115 – 350 mm
considerable reduction in noise, self-cooling when used for dry cuts, reinforced steel core, very long service life
Application:
Natural and artificial stone, reinforced concrete, roof tiles, drywall, ceramics, aggregated concrete, granite
Diamond cutting bladeTS
NATURAL AND ARTIFICIAL STONEAvailable in Ø 115 – 350 mm
Turbo segments with core protection for very fast and easy cutting
Application:Granite, natural and artificial stone, aggregated concrete, reinforced concrete, roof-tiles, building material
Diamond cutting bladeTS mit Flansch
NATURAL AND ARTIFICIAL STONEAvailable in Ø 115 – 230 mm
With M14 thread alu-flange for flush cutting, core protection segments
Application:
Granite, natural and artificial stone, aggregated concrete, reinforced concrete, roof-tiles, building material
Diamond cutting bladePLT-10
NATURAL AND ARTIFICIAL STONEAvailable in Ø 115 – 230 mm
Continous turbo rim for clean cuts.
Application:
natural and artificial stone, concrete, building material
Diamond cutting bladeMAGNUM
NATURAL AND ARTIFICIAL STONEAvailable in Ø 300 – 400 mm
special segments, alternating segments with high diamond concentration.
Application:
Granite and hard stone, very hard clinker and all hard materials
Diamond cutting bladeSAXUM
NATURAL AND ARTIFICIAL STONEVerfügbar in Ø 300 – 350 mm
Reduction in noise by special sandwich steel core, narrow spaced segments, very clean cutting
Application:
Granite, hard clinkers, hard artificial stone, refractory stones, stove tiles
Diamond cutting bladeTOP GRANIT
NATURAL AND ARTIFICIAL STONEAvailable in Ø 300 – 450 mm
Reduction in noise by special sandwich steel core, short tooth segments.
Application:
Segment height 12 mm / sandwich segments
Diamond cutting bladeGRANIT 1200
NATURAL AND ARTIFICIAL STONEAvailable in Ø 300 – 450 mm
Special blade for granite with sandwich segements.
Application:
Hard stone, granite, porphyry, hard clinkerSegment height 12 mm / sandwich segments
Diamant-TrennscheibeAX 12
CONCRETE / UNIVERSALVerfügbar in Ø 115 – 230 mm
Diamant-Tennscheibe mit Matrix-Segmenten.
Einsatzbereiche:Beton armiert, Waschbeton, Ziegel, Keramik, Klinker, Granite, Baustellenmaterial
Diamond tile bitsDIEWE Akku Power – BOHREN
TILES / CERAMICS / HARD ARTIFICIAL STONEAvailable in Ø 6, 8, 10, 12 und 14 mm
Diamond tile drills for drilling clean, sharp edged holes
Application:Granite, tiles, porcelain, ceramic
Diamond cutting bladeMAGIC TURBO SILENT
NATURAL AND ARTIFICIAL STONEAvailable in Ø 230 – 450 mm
Reduction in noise by laser slots, short tooth segments, alternating segments
Application:
concrete, granite, hard clinker, reinforced concrete, building material
Diamant-TrennscheibeMAGIC TURBO PLUS
CONCRETE / UNIVERSALAvailable in Ø 115 – 230 mm
- Short tooth exchange segments for powerful cuts
- Cooling holes
Application:
Concrete, granite, hard clinker, reinforced concrete, general building material
DiamanttrennscheibeBETON SPEZIAL
CONCRETE / UNIVERSAL
Available in Ø 115 – 600 mm
- Very powerful diamond cutting blade
- Long product lifespan
Application:Concrete, reinforced concrete aggregated concrete, roof tiles, red brick, medium hard clinker, building material
Diamond cutting bladeBM II K
CONCRETE / UNIVERSAL
Available in Ø 600 – 906 mm
- Running smoothly
- Clean cuts
Einsatzbereiche:Universal, general purpose, building materialPowerful concrete blade for stone saws!
DiamanttrennscheibeFB III
CONCRETE / UNIVERSALAvailable in Ø 300 – 900 mm
- Rigid type for heavy joint cutters
- Laser welded
Application:Concrete, reinforced concrete, cured concretePowerful concrete blade for heavy joint cutters!
Diamond cutting bladeSC 620
ABRASIVE MATERIALAvailable in Ø 300 – 450 mm
- With alternating and protection segments
- Less tool changes
Application:concrete and abrasives materialCombi blade for cutting concrete and asphalt!
Diamond cutting bladeDA 3000
ABRASIVE MATERIALAvailable in Ø 115 – 450 mm
- core protection segments
- for low powered machines
Application:asphalt and abrasive material
Diamond cutting bladeHLES
ABRASIVE MATERIALAvailable in Ø 300 – 600 mm
- with wear retardents for protection from relief grinding due to segment tear-off
Application:Asphalt
Diamond cutting bladeFA III S
ABRASIVE MATERIALAvailable in Ø 300 – 900 mm
- With wear retardents for protection from relief grinding due to segment tear-off
Application:AsphaltPowerful asphalt blade for joint cutters over 10 kW!
Diamond cutting bladeBS II K
ABRASIVE MATERIALAvailable in Ø 600 – 906 mm
- Running smoothly on stone saws
- Very clean cuts
Application:sandstone, lime-sand stone, basalt, lava, refractory brick, red brick, porotoneSpecial blade for masonry saws
Diamond cutting bladeELB
SPECIAL BLADES
Available in Ø 115 – 350 mm
- Electroplated diamond blade for cutting of difficult materials
- Protection segment
Application:
Chimney pipes, ceramic clinker, black granite, aggregated concrete with very hard inclusions, tiles ceramic slabs, glass-fibre-reinforced plasticProblem solver for all imaginable cutting jobs
Diamond cutting bladeX-TENSION
SPECIAL BLADESAvailable in Ø 115 – 350 mm
Vacuum brazed diamond disc with large range of applications
Application:concrete, red brick, wood, pvc, steel, cast iron pipesThe fast and universal blade!
INOX Diamond cutting bladeFEX
SPECIAL BLADES
Available in Ø 115 – 350
- No expiration date
- Less costs per cut
- Consistent cut depth
- Vacuum breezed
- Way better performance when used properly
Application:Stainless steel, iron, construction woven mats, copper